Technical description:

• after fixed in the eave and the ridge using pinned hinge fasteners
• engineered corner joints of various angles: convex and concave
• available valley beams and rafter blocks (rafter of various heights to obtain a span of the winter garden roof from 1,8 m to 4,5 m)
• separate gutter fixed to the eave profile using hangers providing a slope and a separate eave profile
• gutter and eave profile provided with fasteners: the most typical angles 90°, 135° and 150°
• for typical angles, there are engineered blocks, i.e. spots where many rafters are joined
• option of installation above and below gutters – profiles and ornamental elements (decorative
• combs, structural ties, enclosures of discharge chutes)
  Victorian Plus is a system suitable for filling made of wall polycarbonate as well as glazed units
• The system is fully compatible with other Aliplast systems used to construct fillings of winter

  garden walls, including non-openable glazing, lift-and-slide doors, tilt-and-slide doors,
  accordion doors and windows.

• The VT system satisfies requirements relating to profile thermal insulation, rainwater and air
  tightness. It also guarantees proper ventilation provided appropriate ventilation
  equipment is used, regardless of weather conditions.

• Wide range of colours – RAL palette (Qualicoat 1518), texture colours, Aliplast Wood Colour Effect
  (wood-like colours), Aliplast Loft View – colours imitating stone surfaces
  (Qualideco PL-0001), anodized colour (Qualanod 1808), bi-colour.

Technical description of the system:

• load-bearing element of the structure located inside (below the infill), anchors fixed to a depth of 105 mm or 125 mm
• rafters and external masking caps available as soft (rounded) and with distinct rectangular shapes
• variety of gutter shapes, option to install gutter mesh guards to prevent undesired accumulation
• available system discharge chutes, optionally to be enclosed
• option to reinforce the rafter and gutter beams using aluminium or steel shaped sections
• the system offers articulated joints in the gutter and roof ridge beams, engineered ties, gutter and discharge chute connectors
• roof plane pitch 5-45°
• Aliver 2000+ is suitable for infills made of wall polycarbonate as well as glass (single,
  double and triple glazed)

• The Aliver 2000+ system satisfies requirements relating to profile thermal insulation, rainwater
  and air tightness. The system also guarantees proper ventilation provided

• Wide range of colours – RAL palette (Qualicoat 1518), texture colours, Aliplast Wood Colour Effect
  (wood-like colours), Aliplast Loft View – colours imitating stone surfaces
  (Qualideco PL-0001), anodized colour (Qualanod 1808), bi-colour.

• • Roof system without thermal insulation.

Available options of the system:

• eave with load-bearing rafter from the external side
• pyramidal roof with various types of the load-bearing rafter (fixed externally)
• double-pitched roof with external rafter
• roof with valley gutters and external rafter

Technical description:

• span between two rafters up to 600 cm
• depth of the load-bearing rafter up to 600 cm*
  *Assumptions: VSG 10 mm, span between rafters 80 cm, snow food 85 kg/m’, deflection coefficient
  L/200
• load-bearing structure with various gutter solutions
• option to install solar shading devices to lateral structure beams
• a wide variety of gutter solutions
• roof pitch from 5° to 25° degrees
• option to attach lighting through a terminal strip
• quick prefabrication
• Wide range of colours – RAL palette (Qualicoat 1518), texture colours, Aliplast Wood Colour Effect
  (wood-like colours), Aliplast Loft View – colours imitating stone surfaces
  (Qualideco PL-0001), anodized colour (Qualanod 1808), bi-colour.